How to start a riding lawn mower
Riding lawn mowers are the best choice for mowing large areas of grass quickly and efficiently. In terms of convenience and speed, they’re unquestionably the most comfortable tools for cutting grass in the shortest time. Riding lawn mowers are more expensive than traditional mowers, owing to the numerous benefits that they provide.
Getting a Riding Lawn Mower to Start is Simple
- Take a firm seat in your chair
The fact that this is the first step is without a doubt important to note. Place yourself in a comfortable position where you can reach all of the controls.
- Begin the engine’s performance
Inbuilt safety features are standard on most riding lawn mowers, with the engine shutting down unless the parking brakes are applied or the operator is properly seated in the mower.
- Next, apply the brake pedal
Check the left side of the vehicle, as the brake may be located near the left foot pedal. A brake, on the other hand, may be located on the mower and may be reached by pulling a lever. When you want to use the brake, depress the lever or pedal. As well as maintaining that position on the brake pedal
- Depress the Parking Brake to prevent the vehicle from rolling back into it
The location of the parking brakes varies from model to model, just as it does with the pedals or levers braking system mentioned above. Nonetheless, they’ll almost certainly be located near the left or right side of your seat, depending on which direction you’re facing.
To locate them, lift the brake pedal and slowly depress the brake pedal until they are no longer visible. Some lawn mowers are not equipped with a brake lever or lever. To use the parking brake in this situation, depress the brake pedal all the way down. Alternately shift into Neutral and back again.
- Locate the lever that controls the gear shift
Usually, it is located near the steering wheel, but it can also be found below the seat in some vehicles. To return to neutral, move the lever so that it points in the direction of N. Depending on the mower, you may be required to hold the brake pedal down after shifting gears. If your mower is one of those that does not have parking brake knobs, as previously mentioned, you will need to press the brakes down when shifting gears to prevent the mower from rolling backwards.
- Move the Throttle to the Choke Position
Look for the throttle lever on your steering wheel or dashboard. It’s possible that it’s right next to the seat on the left side of the bus. Due to the fact that they depict a turtle and a rabbit, most throttles are considered to be easily distinguishable. To engage the choke, you must first move this throttle lever. A choked riding lawn mower should be started with care, and this is something you should be familiar with. If you have a model with slow and fast settings, you could accomplish this by putting the lever in the middle of those settings, or by pulling the lever upwards past fast to a point that is sometimes indicated by the presence of a circle with a diagonal line running through it.
- Place the Ignition Key
Using this method, you’ll have complete control over how you operate your vehicle’s ignition switch. This is typically found either next to the mower’s seat or on the lawn mowers dashboard.
- Rotate the key to the right-hand side counterclockwise to complete the process
Alternatively, if your key is in the ignition, you can simply turn it all of the way to the right. After a few moments, you’ll notice that the engine is starting to rev. If you want the engine to start, you may need to hold the key in this position for up to 15 seconds or even more.
- Push the throttle all the way down to the fast setting
As soon as you have finished, return to the throttle and release the riding lawn mower choke by moving the lever upwards to a faster setting, and the lawn mower is now ready to be used, though some older models may require you to allow the engine to warm up before you can begin operating it.
Getting a Riding Lawn Mower to Start in the Cold
Because lawnmowers and automobiles have essentially the same internal mechanisms, cold weather can cause the same damage to both. To ensure that everything is in working order after the cold season, perform an internal engine inspection. When it comes to how to start a riding lawn mower in the cold, this is an important step that is frequently overlooked. Similar to this, it is advisable to prevent any type of accident by allowing the engine to warm up gradually, checking that everything is still in working order within the engine. When you are trying to start a lawn mower in the cold, it is even more critical that you check the oil level before you turn on the ignition switch.
In this situation, it is critical that you check the fuel level in your mower and make sure that the ignition switch is in the correct position once more. The manual, as mentioned earlier in this article, will provide an explanation of the various knob settings that are required to operate the machine when it is first turned on. Adjust the seat by pulling and pushing it, and check to see if the cutting deck is clean before continuing. When you leave the mower outside in the cold, you may find that you have to crank the engine even harder to get it to start in the first place.
