How to hang string lights on balcony ceiling
A balcony is your own personal oasisa place to unwind and rest while taking in some fresh air. Your outdoor space can be transformed from a simple balcony to a pleasant paradise with the help of good lighting. Whether you’re decorating an apartment balcony or something larger, there are many different lighting options to select from. Experiment with various lighting options to see what type of unique refuge you can build.
Patterning a Zig-Zag
- Measure the size of your room before deciding how far apart your lights should be spaced.
Measure the length and width of the room in which you wish to hang your lights with a tape measure. Select the distance between your anchor points on the ceiling once you’ve determined the dimensions. You’ll need more lights if you set them closer together, but your room will be brighter as a result.
- Place the first hook near the outlet you’re utilizing on your ceiling.
Look for little, non-damaging adhesive clips or hooks to use on your ceiling. Place the first hook just above your power outlet so you can plug it in easily. Remove the adhesive backing from your clip and push it for 30 seconds against the ceiling.
- The hooks should be spaced along the ceiling’s edge.
Install the rest of your hooks at the same distance along the length of the wall as you did before. To ensure that the adhesive backing is secure, press it on your ceiling for at least 30 seconds. Work your way out from the initial hook to the room’s edges, ensuring that the hooks are evenly spaced.
- Half the distance between your hooks, offset the hooks on the opposite wall.
Locate the location on the opposite side of the room that corresponds to the first hook. Instead of aligning your hook with the one on the other side of the room, move it half the distance. As a result, the zig-zag pattern on your ceiling will be created by your lights. The rest of the hooks should be installed along the ceiling, making your way to the room’s edges. If you spaced your hooks 2 ft (61 cm) apart on the first wall, space them 1 ft (30 cm) apart on the opposite wall.
- Between the hooks, string the lights securely.
Begin with the closest hook to the outlet. Cross the lights from one side of your ceiling to the other. Pull the lights tight and wrap the string once around the hook when you reach a hook. Continue zigzagging across the ceiling until it’s completely covered.Allow your lights to hang down somewhat from the ceiling rather than pulling them tight if you want a more relaxed appearance.
Using String Lights to Frame Your Ceiling
- Hang hooks around the edge of your ceiling.
To avoid damaging your ceiling while hanging lights, use adhesive-backed cable hooks. Remove the hook’s backing and secure it to the ceiling for 30 seconds.If your ceiling is made of popcorn, you can use clips that are nailed into it instead.
- Begin by suspending your lights above a plug or in a corner.
Connect your lights to an outlet to determine how far the string should hang down your wall. Run the lights down a corner of your room and to the outlet if you want to be more inconspicuous with your lighting. To keep the string lights in place after they’ve been plugged in, coil them once around the first hook.Some of your string lights will hang down the length of your wall and into the outlet.
- Between the hooks, run the lights.
Hang the string lights between each of the hooks around the room’s perimeter. To keep your lights from falling down, wrap the cord around each hook once. Allowing your string lights to dangle loosely from the hooks rather than pulling them tight will give your room a more relaxed vibe.
Making a Headboard with String Lights
- Behind your bed, hang hooks around the border of the ceiling.
Remove the strip from the adhesive-backed cable hooks and push it for at least 30 seconds into your ceiling. You’ll avoid damaging your ceiling by hanging your lights this way. Use clips that fasten into the rafters if you have a popcorn ceiling or need a long-term solution.
- 5–6 ftbelow your ceiling hooks, place clips.
Attach adhesive hooks to the wall at a distance of 5–6 ft from the clips on your ceiling. Instead of dangling carelessly on the wall, the lights are drawn firmly.If you don’t mind little holes in your paint, use pushpins on the wall.
- Drape the string lights over the first two top hooks after plugging them in.
Connect your lights to an outlet and run them up the wall to one of the top clips on either side. Make a straight line up your wall with the string lights. To keep the light string in place, make a single loop around the hook. Wrap the lights around another top hook horizontally and secure it.Use an extension cord to bring them closer if there isn’t an outlet close by.
- Wrap the lights around two of the lower clips at the bottom.
From the second top hook, run your string lights down to the wall clip just beneath it. Wrap the lights around the clip once before moving on to the next clip. The lights should be wrapped around the clip in a loop.
- Work across your wall in an up-and-down manner.
From the lower clips to the ceiling hook, string the lights. To avoid having to pin any lights to your ceiling try to end the lights so that they are hanging down.
