How to Clean the Charging Port on an iPhone with toothbrush
We’ve all been there: you connect in your charger and discover that the charging port on your iPad or iPhone isn’t working. A quick scan of Apple’s forums reveals a recurring theme: many iPhone and iPad customers are encountering charging issues. Pull in and twist the charging cord, and if you’re lucky, it will begin to charge. I had the same issue with my iPhone X a few days ago. And I discovered a quick and easy way to clean the iPhone charging port. Check your iPhone charging port before you spend a lot of money solving hardware or software charging difficulties or blaming iPhone lightning cables.
This is a delicate procedure that can be completed at home. We’ll show you how to clean the charging port on your iPhone.
- First and foremost, if you haven’t already, turn off your iPhone.
- Next, get a flashlight and investigate what you’re up against. It’s also a good idea to do this after each step so you can see how far you’ve come.
- Using compressed air to clean iPhones is not recommended by Apple. However, this is a well-written piece. We’ve included instructions for people who want to apply this well-known and successful method. Hold a can of compressed air, such as Falcon Dust, upright and blast the port a few times to clean away any dust that has accumulated. After that, plug in your iPhone to see if the problem has been resolved. If this is not the case, proceed to the next step.
You can use a toothbrush to try to clear any visible debris, but do so with caution because the charging point is easily damaged. Insert the toothbrush loosely and move it from side to side to observe if any debris is picked up right away. At this stage, don’t put any pressure on it. If you detect any debris on your vehicle, wipe the toothbrush clean with a dry cloth. Continue to plug in the phone between movements to see if the problem has been resolved.
How to Clean the Charging Port on an iPhone
Here are some of the finest ways to clean your iPhone charging port with common household products. We’ve put together a complete step-by-step tutorial for troubleshooting charging issues. It’s your worst nightmare when your iPhone’s battery is at 5% and you plug in the charger and nothing happens. Most of us have experienced a panic attack at some point in our lives, and it invariably leads to something negative.
- Use compressed air to clean the iPhone charging port.
- Use a toothpick to clean the iPhone charging port.
- Use a toothbrush to clean the iPhone charging port.
- Using alcohol to clean the iPhone charging port
- Hire a professional to clean the charging port on your iPhone or iPad.
- Try cleaning your iPhone charging port without touching or stabbing anything inside if at all feasible. The charging cable must dock onto delicate contact points — tiny strips of metal — in the port. The iPhone charger will not work if the contact points are broken, no matter how hard you attempt to fix it.
Furthermore, if the anchors on either side of your charging port become damaged, they will be unable to lock in your charging cable, which is a major issue. After the damage, the only option is to have the charging port repaired by a professional, which comes at a cost in both money and time. So the first rule is to use caution. To be cautious, back up your iPhone or iPad to your computer or iCloud, then turn it off before attempting any of the techniques listed below.
Method 1: Use compressed air to clean the iPhone charging port
This is one of the most effective methods for clearing the iPhone charging port. Step 1: Hold the compressed air can close to the charging port, but not too close, and don’t stab the nozzle inside the charging port (remember all those are delicate parts).
Step 2: Spray small, gentle bursts of air.
Step 3: After blowing a precise burst of air into the port, wait a few moments before reconnecting your charging cord to test if it works. If the air has removed any dust or debris from the port, it should be operational again.
Method 2: Use a toothbrush to clean the iPhone charging port
Are you still having problems? A can of compressed air will not always fix your problem. There There could be lint in the port that air can’t get rid of. Clean the port again, but this time gently digs a little into the charging port with a common household toothbrush to remove the lint. All of the concerns we outlined earlier still apply, so it’s critical to be as cautious as possible. A toothbrush is an excellent instrument for this.
1st step: Turn off our iPhone and take a toothbrush and spin it around a cotton ball till it catches and wraps around the toothbrush.
Step 2: Locate a brightly lit area, such as beneath a desk lamp. Alternatively, you can use a flashlight.
Step 3: Gently press the top of the toothbrush into the gums.
Gently wriggle the top of the toothbrush into the charging port while lightly inserting it.
Step 4: At first, don’t apply any pressure to the toothbrush; if no particles or dirt come loose, use the lightest pressure possible for a soft scrape. Any more than that and you risk permanently damaging the port.
Step 5: If your toothbrush starts to pick up filth or knock out particles, stop and switch to interdentally brushes or canned air, if possible. Using these tools to clean your charging port can cause more harm than good: Toothbrush bristles might become lodged inside and aggravate the situation. Blowing on the port with your mouth—water particles in your breath might add moisture and damage your device.