How to clean iphone speakers

How to Clean iphone Speakers

How to clean iphone speakers

Your iPhone’s speaker holes will ultimately become blocked with dust, debris, or wax, regardless of how you use it. When you play music, receive incoming call rings, or talk on the phone, this will influence the sound quality and loudness. You’re probably seeking for a solution to clean your iPhone’s speakers and eliminate all dust without hurting them. There are a million ways to fix this, but we’ve compiled a list of the safest methods for cleaning the iPhone speaker holes.

Let’s go over the finest ways to clean the dirt off the iPhone speaker grills that are currently accessible. We organized the approaches by how simple and safe they were to use. Oh, and don’t forget to read the Do’s and Don’ts before cleaning iPhone speakers. Dust, skin/oil, cosmetics, and other material stuck on the speaker grill often create a defective earpiece speaker by blocking audio transmission. See if you can fix your iPhone speaker by following the methods below.

What is the best way to clean the speaker on your iPhone?

  1. Get yourself a new toothbrush (or an electronic device brush)
  2. Remove any debris from the earpiece speaker (located on the top of your iPhone).
  3. Blow bottled air across the speaker (not directly into it) if necessary.
  4. Perform a test call to see if your speaker has improved.
  5. Contact Apple support or an AASP if you’re still having problems.

Clean your iPhone speakers in a variety of ways. The speaker could be scrubbed with a soft-bristle toothbrush. To clear material from the speaker’s nooks and crannies, you could use canned air. Finally, you can use sticky tape to clean out the crud that has accumulated in or around the speaker. Clean the headphone port as well if you’re having difficulties getting the speaker to play.

  1. Clean the speakers with a soft cloth. Brush the speaker ports using a soft-bristled toothbrush. The dust and muck on the speakers should be removed with this gentle motion.
  • For a more dramatic impact, immerse the toothbrush bristles at the very tip in rubbing alcohol. Do not completely submerge the brush in the liquid.
  1. Painter’s tape is a good option. A blue tape used for painting walls is known as painter’s tape. It comes with pressure-sensitive glue that’s ideal for cleaning iPhone speakers.
  • Tear out a small piece and roll it into a cylinder, sticky side out. The diameter of the cylinder should be about the same as your index finger’s breadth.
  • Place the tape over your index finger and press it against the speaker of your iPhone.
  • The tape should capture all of the dirt and debris that has accumulated in the speakers.
  • After each application, double-check the tape’s surface. Remove and discard the used tape if it has lint and filth adhered to it. Roll another small cylinder and continue the process.
  1. Remove any debris from the speaker using a blowtorch. Blowing lint and dust out of your speakers with compressed air is a good way to start. Canned oxygen is compressed air, which is frequently used to clean computers and electronics. To begin, place your phone face down on a flat surface.
  • Before using a can, read the instructions on the back. Always follow the manufacturer’s instructions for using canned air.
  • From whatever distance the directions on the can advise, aim the canned air nozzle at the speaker.
  • Squeeze the handle of the can for a few seconds before letting go.
  1. Speak with an Apple representative. To get assistance, go to an Apple store and speak with an Apple technician. If there are no Apple stores in your area, go to on Apple’s help website. Click “Set up a repair” and then “iPhone” to get started.

Select “Repairs and Physical Damage” and then “Unable to hear through receiver or speakers” from the drop-down menu. “Built-in speaker” appears on the next screen. You have a few alternatives at this stage, including chatting, scheduling a call, and sending anything in for repair. Select the best choice for you.

  1. Restore the iPhone to its original state. If Apple is unable to assist you, the nuclear option a complete phone restoration may be recommended. Contacts, calendars, photographs, and other saved data will be deleted if you restore your iPhone. Text messages, call history, notes, sound settings, and other adjustable phone choices, on the other hand, should all be saved to the cloud. onnect your iPhone to your computer with the USB cable that came with it to restore it. On your computer, open iTunes.

If you’re prompted, enter your passcode or select Trust This Computer.

When it shows in iTunes, choose your phone. Restore [your device] is a button in the summary panel. To double-check your choice, click one more. You could make a backup of the information before starting the restoration procedure, same to how you did before updating your iOS. Your iPhone’s speakers will gradually fill up with dust, grit, and other nasty detritus, no matter how meticulous you are about keeping your smartphone clean. When listening to music or making phone calls, this can cause your iPhone’s speakers to sound distorted and muffled.

Cleaning your iPhone speakers “dos and don’ts”

Here are some things you should never do before even considering what tools you might require or reaching for anything that could harm your precious smartphone. To get rid of the muck, avoid using any sharp items. To scrape your speaker grilles, some people recommend using the pointed edge of toothpicks, tweezers, or even paperclips. Don’t.

Avoid using any type of liquid, even rubbing alcohol. While rubbing alcohol evaporates faster than water, any liquid with the inner workings of an iPhone are a bad combination. Use pressurized air from a can instead. While these tools are great for cleaning tough electronics like laptop keyboards, the force they exert is too intense for more sensitive gadgets. It’s possible that you’ll end up pushing more dirt into the device.